To support smart substations, communication options are now available on meters, controllers and protection relays for unified supervision.
1. What is covered
RS485 with Modbus RTU is now offered across the HUAYI portfolio — panel meters, power quality and power factor meters, temperature and humidity controllers, switchgear control devices and motor protection relays. The intention is simple: one twisted pair around the substation, one protocol at the gateway, and one place to look at the whole installation.
2. A typical topology
In practice a substation is wired as one or two RS485 segments per voltage level. Each device is a slave with a unique address; a serial gateway or a PLC polls the segment and converts to Modbus TCP or to the SCADA protocol in use. Keeping the segment short and the device count moderate is more reliable than pushing distance limits.
- One daisy chain per segment, termination resistors at both ends.
- Addresses planned on paper before energising — not assigned on the fly.
- Screened twisted pair, screen earthed at one point only.
3. Commissioning checklist
Communication faults found during commissioning are almost always configuration faults. The following order works well: verify the wiring with the power off, confirm address and baud rate from the device display, read one register from a laptop directly, then read the same register through the gateway. If the direct read works and the gateway read does not, the problem is in the gateway mapping.
4. Availability
Communication is offered as an option on selected models and as standard on others, depending on the product family. Because the option matrix changes with firmware revisions, the quickest way to confirm a specific model is to send us the model list from your project. Our sales engineers will return the communication availability and the register map for each line item.
For retrofit projects, the same serial output can usually be added to an existing installation without replacing the whole device — ask us to check your serial numbers.